We’ve been shooting a few short videos around the shop to show what these systems actually look like in use. 

If you’re dealing with rust, coatings, marking, or tool wear, these are worth a look.

Laser Cleaning Demo (Rust + Paint)

https://youtube.com/shorts/OTWS0sCfYkg?si=C8xKMFKWXuv16KB_

This is a quick clip, but it gives a good feel for how LC/RR laser cleaning actually works.

Rust is where this process really shines. You can clean a surface without grinding or blasting and without the mess that comes with it.

Paint and coatings can be removed too, but it depends on what you’re dealing with. Some come off easily. Others take more time or multiple passes. Thickness and type matter.

Where we see this used most:

• Weld prep on rusted steel
• Cleaning parts without damaging the base material
• Removing coatings in tight or controlled areas
• Replacing grinding or blasting in certain spots

FlyMarker mini — Marking Around the Shop

https://youtu.be/5qohuI_GLFk

We grabbed the FlyMarker mini and walked around the shop marking whatever we could find.

No cables. No air. No setup.

This is where it makes sense:

• Large or heavy parts
• Marking parts that are already installed
• Shops that don’t want to move parts to a station
• Basic part ID and traceability

Easy to operate and it solves a lot of everyday problems.

Rocklinizer on a Gantry: Automated Coating

https://youtu.be/ZFCbN6_fGb4

Rocklinizer on a gantry, coating steel automatically.

This is the same process many of you are doing by hand, just automated.

It gives you:

• More consistent coverage
• Defined patterns
• Better repeatability
• A path to scale if you’re doing higher volume work

If you’re already using the Rocklinizer manually, this is where things can go next.

Wrap Up

These are three different solutions, but they all drive similar efficiencies.

If you’re thinking about going down any of these paths, get in touch.

 

Tags: videos , laser cleaning , demo , rust , paint , removal , weld prep , rusted steel , grinding , blasting , coatings , lc/rr , flymarker , shop , rocklinizer , gantry , automated coating , solutions

« Back